91 Comments to Sphere Core

1. Phear says:

   November 4, 2007 at 7:07 pm

   I need help… I cant get the hot water into the tube thing….

   I’m an idiot, please explain simply

2. Daniel says:

   November 5, 2007 at 9:49 am

   Walkthrough:

   Show

   On starting the game, click towards the bottom of the screen (just above the inventory) to look down at the floor. Remove the floorboards and collect the screwdriver and the glass. The starting screen will be referred to as “North”.
   -Go to the west wall and collect the kettle from the table.
   -Also collect the tile with part of the circuit board on from the right enertron alcove.
   -Go to the south screen. Open the cupboard door and remove the wooden tile containing the second part of the circuit board.

   -Drag the kettle from the inventory to the sink, in order to fill the kettle.
   -Use the screwdriver on the four screws around the metal plate on the wall, to remove it. When it falls off, collect the two power cores and the remote from inside.
   There is a piece of wallpaper just above the sink which can be clicked on. Doing so will reveal the code to the Cryo Unit (534).
   Just above and to the left of the sink is a tile which can be clicked. This is the final piece of circuit board.
   Click on the Cryo Unit, and enter the code (534). The numbers ARE in English, they are just heavily modified (perhaps the digits 3 and 4 are the most recognizable, the rest are 1, 2 and 5, it should be simple to work out which is which as they are in order).
   Remove the frozen embryo from the cryo unit.
   Go to the east screen. Drag each of the tiles collected so far onto the tile rack on the right of the screen, in order to reveal the pieces of the puzzle.
   Drag the puzzle pieces from their rack onto the circuit board. When a piece is dragged onto a part of the puzzle, it will lock in place until the power button is pressed. If you make a mistake, just press the power button and it will release the pieces so they can be corrected. When the puzzle is correctly assembled, press the power button to activate the power to the magnetic coils under the sphere.
   Go back to the Enertron (west). Drag the kettle back to it’s stand in order to boil the water.
   Drag the glass onto the kettle to create a glass of hot water.
   Drag the embryo from the Inventory onto the left alcove of the enertron. Drag the first power core to the right alcove. Hit the power button to create the Ice Power Core. Remove the power core and embryo from the enertron.
   Repeat the above process with the glass of hot water and the second power core to create the Hot Power Core.
   Go back to the Sphere.
   Click the remote button in the inventory to make the sphere remote visible on the screen.
   Click button 1 (same symbols from the cryo unit) to open the Sphere Iris.
   Drag the Ice Power Core into the hole and close the iris again.
   Press button 2 to cause the sphere to levitate, and lower it’s legs.
   Press button 3 to activate the Head. This is as far as you can get using the Ice Core. The Sphere needs more power to move onto the next stage.
   Remove the Ice Power Core and replace it with the Hot Power Core. The machine will still not activate it’s the 4th button until it’s target is ready:
   Go to the south screen, and click on the large screw in the floor until it is at it’s highest setting. Drag the Ice Power Core on top of the screw.
   Go back to the north and press button 4. A beam of energy should be fired by the head, and strike the Ice Power Core, converting it into the Super Power Core. Click on it to collect it.
   Go back to the north screen, remove the Hot Power Core, and insert the Super Power Core.
   Press button 5 on the remote. The Sphere should open, and begin charging up for it’s final ability.
   After a short animation, the sphere will vanish, taking with it part of the room, leaving a hole in the wall. Click on the hole to Escape.

3. DAnnyrulessomuch45 says:

   November 11, 2007 at 6:15 am

   I have put the puzzle bits in and the paths come up but nothing happens with the sphere

4. Jon A says:

   November 13, 2007 at 11:39 pm

   I actually think this one is pretty easy compared to some of the others…

5. Ryan says:

   November 23, 2007 at 3:48 pm

   it wont let me unscrew panel with screw driver need help is it the panel by the sink

6. ESCAPEAHOLIC says:

   November 30, 2007 at 1:17 pm

   Ryan here’s the answer to you question

   Show

   Yes it is the panel by the sink, there are 4 screws, the two bottom ones are harder to see but they are there. Grab the screwdriver and drag it to the screws, the tip DOES NOT need to touch the screws. With the screwdriver in hand click on all four screws, this will unscrew them.

7. Marquita says:

   December 8, 2007 at 6:40 am

   the hell!!! i cant move on with the code in the trash bin… errrrr
   how do i know what is 5 3 and 4 in there. its all symbols. ugh…
   help me.

8. jjbonbons says:

   December 10, 2007 at 1:42 am

   i cant put the water filled glass into the left hole of the enertron, maybe there’s a bug?

9. Csaba says:

   December 13, 2007 at 12:04 pm

   So if the head appears that’s it???? WTF?

10. Ryan says:

    January 9, 2008 at 1:56 pm

    Yeah there’s definitely a couple bugs…

    I experienced one with the glass.

    Show

    My Glass of hot water never would fit into the left energy compartment. I had suspected this was what to do as soon as I filled the glass but since it didn’t work I spent 30 minutes clicking around doing nothing. Turns out it was just a bug, and I reloaded the game and beat it in another 20 minutes…

11. yo says:

    January 22, 2008 at 1:13 am

    BTW, I finish, but I have to refresh the page 3 times fcking bug on the electrosarasa

12. colin says:

    January 24, 2008 at 5:36 pm

    how can i shut the music off?!!!

13. I'm out! says:

    January 27, 2008 at 9:00 am

    i’m out

    YEAHH
    thanks to Duero (post 27)

14. who, oh who says:

    February 4, 2008 at 8:12 am

    the green tiles are for elektricity, you must connect them with each other in a certain place

15. Goukakyuu says:

    February 22, 2008 at 3:58 am

    Walkthrough O_O !!
    Show

    1. Click the bottom , rip out the board of wood , collect the Glass and the Screw-Driver , face up , turn right twice.

    2. Turn the giant screw to its highest , then , open the cabinet beneath the sink and take the GREY SQUARE . Now , a the nozzle of the faucet , take the BLUE SQUARE .

    3. Take the screwdriver and unscrew the screws on the metal panel (NOTE : while holding the screwdriver , use the tip of your mouse cursor and point it over the screw) , collect Number Pad and 2 depleted Power Cores

    4.The wallpaper with the green and yellow color , you can tear it , start from the bottom right , follow up 3 small tears , at the 3rd tear , move your cursor up a bit and click , the wall paper tears , revealing the number 534 (The numbers DONT change if you restart the game)

    5.Look into the trash bin thing ,
    5a. The ‘V’ is 1
    5b. The thing that looks like a ‘0’ is 2
    5c. The thing that looks like a ‘3’ is 3
    5d. The inverted ‘V’s is 4
    5c. The upside down ‘G’ is 5
    Put in 534 with the discriptions i told you and take the Embryo
    Zoom out

    6. Go right once , in the right enertron , click the lines to get the WHITE SQUARE , go right twice , put each of the squares onto the gold holders thingys to turn them in circuit boards , now , figure out the curcuit board ..To restart , go right then back to the curcuit board . After figuring it out , press the button with the electric sign on it

    7. Go left twice , put the Embryo in the left enertron slot and 1 depleted into the right slot and press the button , then take back the Embryo and the cold power core . Now take the kettle and go left , turn on the tap and fill the kettle with water , go right again and put the kettle back onto the the boiler , now drag the empty glass onto the kettle to fill it , put the filled glass into the left enertron slot and the other depleted power core into the right slot and press the button , then take the yellow power core

    8. Go right and take out your number pad and press the ‘V’ button to open the Iris , put the cold power core into it and press the ‘V’ button again . Now press the button that looks like an ‘O’ then the button that looks like a ‘3’ . Now open the Iris again and take out the cold power core and put in the yellow power core , then of course , close the Iris again . now go right twice and put the cold power core on the screw and go left twice , now press the 2 inverted ‘V’ button , the head will now shoot out a shockwave beam , then , go right twice and take the Shockwave Charged Power Core , go left twice .

    9. Open the Iris , take out the yellow power core and put in the SWCPC and close the Iris , press the upside down ‘G’ button .

    10. Wait for the Animation to finish , a big hole appears , click and there… YOURE OUT ^^

    Sorry if i missed out anything or did something wrong … BB

16. Guitar_matty says:

    February 23, 2008 at 4:03 pm

    I’ve done all of it up to the kettle and water bit… It sticks to the cursor :S
    Stupid glitch does anyone else get it?

17. LIZ says:

    April 4, 2008 at 9:37 pm

    WHERE CAN I FIND THE WHITE THING

18. walktrough buster says:

    May 6, 2008 at 9:43 am

    O M G EASYEST GAME EVERY. ONLY NOOBS CANT GET TROUGH IT xD

19. masyaf says:

    May 25, 2008 at 7:16 pm

    guys to use the screwdriver on the screws u have to use the pointer on the mouse, otherwise it wont work like it should
    the pointer being the tip of the finger on your mouse

20. masyaf says:

    May 25, 2008 at 7:18 pm

    i beat it in a few mins btw

21. nicole says:

    July 18, 2008 at 10:19 pm

    i can’t get the kettle into the sink. whenever i try it just goes back to the inventory

22. Sam says:

    July 24, 2008 at 1:06 am

    That’s too hard for me I think. =]

23. pjotr says:

    August 3, 2008 at 12:42 pm

    well i put the frozen embryo tube on the screw, but when i turn it stays in the middle of the picure like its floating in the air orso :S

24. yomaster says:

    August 28, 2008 at 7:30 pm

    i connected the tile together now what

25. yomaster says:

    August 28, 2008 at 7:35 pm

    my sphere has a head and legs

26. yomaster says:

    August 28, 2008 at 7:38 pm

    i did it

27. jmac says:

    September 18, 2008 at 7:17 pm

    its soooooooooo easy after you do all that stuff Show

    press the left button on the c panel and then take the cool embrio and take out the hot one and

    YOU Win!!!!!!!!!!!!!!

28. CS says:

    October 24, 2008 at 1:48 pm

    I kept getting stuck at one specific point–I couldn’t get the pitcher of hot water in the Enertron. So I came looking, and found “12 get the water boiler and fill it with water / 13 put the boiler back on its base / 14 use glass on hot boiler.”

    First thought “What glass??”
    Second thought “I win!”
    Third thought “It -exploded-!”

    ‘Sankya Gandalf!

29. AGNTBUSCH says:

    October 30, 2008 at 9:34 am

    why cant i put the damn embryo in the left side it just gets stuck in the middle of the screen and stays there even when i change where i am looking!!

30. jesse says:

    November 25, 2008 at 4:45 pm

    i made it to the face on the sphere now what im stuck

31. Micah says:

    December 8, 2008 at 5:47 pm

    HEY EVERYBODY!!!!!!! The “embryo tubes” are actually called power cores. They are in all the other core games Show

    (such as cube core, prism core, and soul core)

32. Micah says:

    December 8, 2008 at 5:49 pm

    I’m making a FULL walkthrough soon.

33. Maggie May says:

    January 16, 2009 at 4:12 pm

    WOW. there are so many things in this game you just CANNOT do without resetting the game. that sucks. it frustrates me i cant finish it because everytime i restart it and do everything all over again there is something else i cant do.

34. Claudia says:

    January 19, 2009 at 8:57 pm

    okay so i ‘ve got…Show

    . The glass filled with water but i cant place it on the left side square of the enertron.. help any one..it doesnt stay

35. molly says:

    May 24, 2009 at 8:52 am

    i dont know how to complete the circuit,
    can anyone help please?

36. Arby says:

    June 30, 2009 at 1:52 am

    Well, I can’t unscrew the plate screws. I’m wondering whether it’s because I set my mouse to work via single clicks. That is, I prefer to have my mouse set up so that hovering highlights and a single, instead of double, click opens. I will test that.

37. Arby says:

    June 30, 2009 at 1:55 am

    Well, It’s not the single clicking vs double clicking. I can grab the screwdriver and apply it, but soon as I release the button to click, the screwdriver flies back to my collection tray. :-(

38. Arby says:

    June 30, 2009 at 2:12 am

    A YouTube walkthru helped. But it’s wacked. I just imitated the motions I saw in the video, with the weird floor screw in the middle position, as shown, until the panel fell away. The ‘action’ is poor here. Being reasonable and having reasonable expectations for gameplay works against you. That’s not helpful, in my view.

39. Thalyah says:

    July 21, 2010 at 2:53 pm

    how do you beat dis game !!!!!!!!!!!!!!!!!!!!!!!!!! ♥♥♥♥♥♥♥♥♥

40. Thalyah says:

    July 21, 2010 at 2:54 pm

    its so hardish Help PLZ *

41. Thalyah says:

    July 21, 2010 at 2:55 pm

    0mG !t$ M3

Posted on Tuesday, October 16th, 2007. Follow any responses through the RSS 2.0 feed.