91 Comments to Sphere Core

1. mr. beer says:

   October 16, 2007 at 1:07 am

   First one to be stuck?

2. mr. beer says:

   October 16, 2007 at 1:17 am

   I have:
   Show

   1 screwdriver, 1 teaboiler, 1 glass, blue square, brown square, white square, 1 fetus, 1 round keypad, 2 cylinders…

   And now?

3. Mokokauwae says:

   October 16, 2007 at 1:31 am

   Im stuck too and i only have Show

   ( i screwdriver, 1 jug filled with hot water, blue, brown and white square which i matched up in the square box thingy which activated something, 1 round keypad which open that round thing and 2 cylinders- one which i put in the right side of the enertron thing). I also got the numbers 534. Now what?

4. Mokokauwae says:

   October 16, 2007 at 1:33 am

   found Show

   the glass

   now

5. Mokokauwae says:

   October 16, 2007 at 1:34 am

   Okay i filled Show

   the glass with hot water from the jug and put it in the left side of the enertron and it activated the cylinder.

6. honeybee says:

   October 16, 2007 at 1:46 am

   Somebody help me! Where’s that famous Show

   glass?

   I can’t find it.

7. mr. beer says:

   October 16, 2007 at 1:48 am

   Quite harder then it seems, specially at the end.

8. honeybee says:

   October 16, 2007 at 2:15 am

   aaaaaaaaaaarghhhhh! going mad.

   please help me with that damned Show

   glass

   !

   Someone????

9. Mokokauwae says:

   October 16, 2007 at 2:23 am

   its back where you found the screwdriver.

10. honeybee says:

    October 16, 2007 at 2:37 am

    Thanx!!!

11. Clara says:

    October 16, 2007 at 3:29 am

    Walkthrough so far:
    Show

    click on the floor below the round thing and then click on the area in the middle where the crack is. Inside the hole there is the screwdriver and an empty glass
    use the screwdriver on the steel panel on the opposite wall to remove the screws. You get a control pad for the white sphere and 2 embryo tube things
    open the cupboard under the sink to get the brown square
    take the kettle
    click on the tap and fill the kettle in the sink
    put the kettle back to boil the water
    drag the glass on the kettle to fill it with hot water
    put the filled water glass in the left hand side of the enertron
    put one of the embryo tubes in the right hand side of the enertron
    push the green button to energise the tube
    open the sphere by clicking the v symbol on the control pad and put the energised tube in the hole

    Thats where I am so far can anyone help with Show

    the white and blue squares

12. Hitman says:

    October 16, 2007 at 3:57 am

    blue Show

    square at the tap

    white Show

    square at the enertron

13. Emilio says:

    October 16, 2007 at 3:59 am

    Then:
    Show

    Use the numbers 534 on the capsule which is under the pannel. the V symbol is the first number and you click the first button 4 times the second – 2 times and the third – 3 times. get the fetus

14. Emilio says:

    October 16, 2007 at 4:05 am

    Put Show

    the fetus and the second embryo tube in the enertron and push the button

    and I don’t know what to do with the squares too

15. Clara says:

    October 16, 2007 at 4:14 am

    Ok ive found the blue square
    Show

    its under one of the blue tiles behind the sink

    Show

    click on the ripped edge of the wallpaper and you get the code 534

16. honeybee says:

    October 16, 2007 at 4:14 am

    I got

    Show

    that alien thing with head and legs and the two activated cylinder inside

    but there I got completely stuck. what next?

17. Clara says:

    October 16, 2007 at 4:27 am

    get the foetus
    Show

    use the code 534 to open the ‘bin’ in the corner – you have to count the first tile as number 1

18. Clara says:

    October 16, 2007 at 4:29 am

    Show

    use the foetus in the left hand side of the enertron and the other embryo tube in the right hand side and push the green button

19. Evi says:

    October 16, 2007 at 4:45 am

    i can’t unscrew the screws is there something i should do defore?

20. Clara says:

    October 16, 2007 at 4:47 am

    white tile
    Show

    in back of enertron on the left hand side

    then
    Show

    put the tiles on the bars by the circuit board

    Show

    put the tiles in the circuit board (not all the lines match up you just have to get the two ends to connect

    on the sphere
    Show

    put the embryo tube with the blue top into the sphere and close the hole with the remote (V) i then pressed (0) and legs sprouted from the bottom of it. push the bottom button and you get a head

21. Evi says:

    October 16, 2007 at 4:55 am

    i can’t unscrew the screws, is there something i should do defore?

22. george says:

    October 16, 2007 at 4:58 am

    just unscrew the screws with the screwdriver

23. Clara says:

    October 16, 2007 at 5:18 am

    Evi get the screwdriver and put it on top of each of the screws on the corners of the metal plates

24. Clara says:

    October 16, 2007 at 5:43 am

    has anyone got a clue about the giant screw by the sink, theres gotta be something about the height of it but i can’t figure it out. and how do you use the code the second time?

25. Gissa says:

    October 16, 2007 at 6:42 am

    The giant screw
    Show

    Put it in the highest position, then put the cold embryo on top of it, the hot embryo inside the sphere and push some button.. cant remember what :P

26. gandalf says:

    October 16, 2007 at 7:38 am

    The tip with the giant screw doesnt work for me… anyone else a hint?

27. Duero says:

    October 16, 2007 at 7:46 am

    continuing from Post #11, clara’s walkthrough
    Show

    Edit (Clara’s post#11): click on the floor below the round thing and then click on the area in the middle where the crack is. Inside the hole there is the screwdriver and an empty glass
    use the screwdriver on the steel panel on the opposite wall to remove the screws. You get a control pad for the white sphere and 2 embryo tube things
    open the cupboard under the sink to get the brown square
    take the kettle
    click on the tap and fill the kettle in the sink
    put the kettle back to boil the water
    drag the glass on the kettle to fill it with hot water
    put the filled water glass in the left hand side of the enertron
    put one of the embryo tubes in the right hand side of the enertron
    push the green button to energise the tube
    open the sphere by clicking the v symbol on the control pad and put the energised tube in the hole 

    Before going to mess with the sphere, turn back to the screen with the giant screw.
    Click on the green and gold wallpaper on the right edge, about 2/3 the way up to reveal a code (534).
    Zoom in on the biohazard container
    To open it, treat the symbol you see when you zoom in as the number 1 and enter the code 534.
    The case will open, grab the embryo.
    Zoom out, click the tile behind the sink that is 2 up and 2 from the left to get the blue square.
    Go back to the enertron and click the lines in the right side of the machine to get the white square.
    Turn to the right twice to come to a screen with a green circuit board and a power button.
    Place the blue, white and brown squares above and below the circuit board to turn them into circuit boards as well.
    Arrange the 4 boards in the area to the left of the power switch to form a complete path from the power switch to the line on the left. (not that hard cause there are only 4 pieces and you only have to connect one path)
    Once you have a complete path, click the power button
    Go back to the enertron and put the embryo in the left side, and the unused white tube in the right, hit the green button.
    Take the blue charged tube and turn to the sphere.
    Click and drag the round numpad you found with the tubes until it shows up larger on the screen.
    Press the V button to open the hole, put in the blue charged tube, close the hole with the V button and then press the 0 button.
    Then press the button that looks like a 3 with an extra line to pop up the head.
    Take out the blue tube and put in the yellow tube.
    Turn and face the giant screw, move the screw to the highest level and put the blue tube on the top of the giant screw.
    Turn back around to the sphere, make sure the hole is closed with the yellow tube inside and press the right most button on the circular pad. (best I can desribe it is two V’s facing away from each other and overlapping)
    The head will fire a laser at the other tube, turn around and collect the super charged blue tube.
    Turn back to the sphere, open the hole and remove the yellow charged tube and put the super charged blue tube in.
    Close the hole and then press the upsidedown G button in the center.
    An animation will follow with the sphere charging and activating.
    Afterwards there will be a big hole in the floor, click on it and presto, you’re out!

28. gandalf says:

    October 16, 2007 at 8:05 am

    Walkthrough!

    Show

    1 click under the sphere, then on the cracked wood
    2 get screqdriver and glass from the floor
    3 get brown tile from cupboard, blue tile = left tile behind faucet
    4 solve the tile-puzzle (put all tile on rack) press the button
    5 use screwdriver screws on gray panel, be precise! and there are 4 screws, the bottom ones are hard to see
    6 get remote and two tubes
    7 click piece of fleur-de-lis wallpaper, on the right edge somewhere
    8 click bio-hazard trash
    9 first sign you see is 1, second one is 2 etc
    10 fill in the numbers from the wallpaper (534)
    11 get embryo
    12 get the water boiler and fill it with water
    13 put the boiler back on its base
    14 use glass on hot boiler
    15 put embryo and a empty tube in the ENERTRON, and push the button, take them out
    16 same for hot water and other empty tube
    17 click the remote in the inventory once (dont click the buttons but the white part)
    18 go to sphere and click 1 (this opens/closes the sphere)
    19 out embryo-tube in the sphere and close it
    20 now press 2, then 3
    21 take out the embryo-tube and replace it with hot-water-tube, close it
    22 put giant screw on highest position and put the embryo-tube on it
    23 go back to sphere and press 4
    24 take the embryo-tube and put it back in the sphere (take out the other tube) close it
    25 and guess what…press 5

    DONE

29. BoomBoxer says:

    October 16, 2007 at 8:36 am

    haha thanks for the walkthrough gandalf. niwae the buttons i jus pressed it anyhow and it works too. so i guess u jus hav to press the buttons required and that pressing other buttons does not do anything to it. lol.
    weird game. but dun really tink its nice.

30. another me says:

    October 16, 2007 at 8:50 am

    Found it:
    Show

    Take the frozen tube (with the blue top) out, put the hot one (red top) in. Close sphere. Set the giant screw in its upmost position, put the frozen tobe on top of it. Press the right button on the remote, the sphere should now emit an energy beam. The tube on the giant screw has changed, pick it up again. Take the hot tube out of the sphere, put the other in, press middle button – et voilà!

31. Emma says:

    October 16, 2007 at 12:09 pm

    Thanks Gandalf for the walkthrough! =] bt did anyone else think that this game

    Show

    sucked? =)

32. Louise says:

    October 16, 2007 at 3:03 pm

    There must be a bug. I’m like Evi, i CANNOT unscrew the screws with the screwdriver. When I approach my screwdriver from the panel, in front of each screw, the screwdriver won’t stay there and it gets back to its place.

33. Brian says:

    October 16, 2007 at 5:45 pm

    Louise, Show

    don’t use the tip of the screwdriver. Just drag it over on top of the screw and then a small dot will appear indicating the screw is out

34. Ana says:

    October 17, 2007 at 2:04 am

    All right!!! I do it!!!! By the way… If you are from Finland email me… Edit: no email adress please!

35. ali says:

    October 17, 2007 at 3:13 am

    help i am stuck i cant open the steel pannel with screw driver !!!

36. otacsaf says:

    October 17, 2007 at 8:45 am

    metal panel and screws
    Show

    put your arrow/pointer directly over the screws – not the screwdriver head.

37. poolboi says:

    October 17, 2007 at 12:01 pm

    the glass wont go in

38. gazza says:

    October 17, 2007 at 12:57 pm

    what is this giant screw thing about i cant do anything with this ball thingy.. it has a head and legs now..

39. Joe Gamer says:

    October 17, 2007 at 6:36 pm

    If you can’t position the glass or something in the enertron, try restarting the game.
    This game sucks so bad, I can’t believe it.

40. hiccup says:

    October 18, 2007 at 2:00 am

    Where’s the faucet???

41. Gregorian says:

    October 18, 2007 at 2:22 am

    HELP!!! MY SPHERE IS SMOKING!!!!!!!!!!!!!

    AAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHH

42. charlies says:

    October 19, 2007 at 2:46 am

    how do put the water in to the ketal

43. Tom-tom says:

    October 19, 2007 at 7:04 pm

    how do u get the giant screw out of the hole

44. Greg says:

    October 21, 2007 at 4:51 pm

    Got it

45. fluffy says:

    October 31, 2007 at 10:11 am

    you have to point your arrow on the screws when you’re holding the screwdriver, not the screwdriver itself

46. Wellaj says:

    October 31, 2007 at 10:40 am

    YAY i did it =D but thanks for the walktrought Duero

47. little ani says:

    November 1, 2007 at 5:17 am

    where is the white tile? like i cannnot find it on the lines near the entron…

48. little ani says:

    November 1, 2007 at 5:19 am

    oooh…nvm. i’m just dumb

49. None says:

    November 1, 2007 at 6:57 am

    What to do with the squares
    Show

    Take the 4 squares and put them at the energy thing right of the sphere. press the ligthning button

50. ..... says:

    November 3, 2007 at 6:33 am

    I Don’t get this!

    All I have is: Show

    2 green tiles with black stripes.. and a teaboiler.

    ANYONE??

    I need a walkthrough..

    TY.. :)

Posted on Tuesday, October 16th, 2007. Follow any responses through the RSS 2.0 feed.