Underworld Army – 1: Professor Pain’s Evil Experiment

Categories: Adventure, Flash, Free, Games, Online, Point'n'click, Walkthrough

Underworld Army is a new Point’n’click adventure series from Pasanna Kumar. In this first episode, you have to find a secret lift and a secret train to get to Professor Pain’s army. Your mission is to deactivate Professor Pain’s robotic army and save the world before it’s too late! Have fun!

Underworld Army 1 walkthrough (thanks Genie!)

By Eric

current rating 4.15

Previous Game

Next Game

10 Comments to Underworld Army – 1: Professor Pain’s Evil Experiment

1. Monte49 says:

   October 15, 2010 at 1:07 pm

   first

2. Genie says:

   October 15, 2010 at 5:42 pm

   Seems a reasonable, logical game. Problem is I can’t get past the hanging lamp problem in the dining room. Here’s as far as I’ve got:
   Show

   Open garage door (press button to side), take screwdriver. Note code pad on door.

   Leave garage, approach front door and use screwdriver to remove panel. Arrange tubes and press panels to move ball first from left to middle and then from middle to right. Door should open.

   Enter hall. Examine wiring to right of bars (fuses required). Note key on ceiling fan. Press “F” button on wall ahead – key falls. Take key.

   Use key on door on right. Enter room. Puzzle on cupboard on left: Starting with the inner circle, number 1, rotate the ring to line up the parts. Press the numbers 1-4 as each ring is lined up with the previous. Finally rotate the whole thing to the ball release position and door opens. Take fuse.

   Turn on table lamp and note code: 2958. Back up twice (front yard) and enter the garage again. Use the code in the safe at the back and take a second fuse. Back out.

   Go back in the house and to the clock arrangement to the right of the bars. Insert the two fuses from the inventory. Rotate the rings (first three controls) to form a flow of liquid/gas from the centre, out to both left and right. The balloon should inflate and both barriers (top/centre) should drop. Press the final control (yellow) to fire the arrow and raise the bars.

   Enter the dining room. Note parts missing from painting on wall. Note ceiling light. Open the freezer compartment on the right (top door). Note switch at the back behind the ice. Press DFrost. Wait a moment and press the switch.

   Now you can zoom on the ceiling light. Move the cells to light up all four lanterns. Need to align the symbols so that each column has the same symbol in each row.

   Open the door back left and enter the toilet. Flush the toilet (is this step necessary?) and lift the cystern lid. Look inside and take the glasses (fingerprint viewers) that fall. Note tap? Back out.

   Go into the kitchen (door on the right). Open cupboard straight ahead and take the green access card. Note hobs and taps can be turned on.

   Back up and onto the staircase to the left. Go upstairs (first floor).

   Library (first floor on left): Solve the storyboard on the wall back left. Press Check when in order and take the prize (a right leg).

   Enter the bedroom to the right. Move the right hand pillow and take kid paper. Examine it.

   Enter the bathroom. Use glasses and take print on right.

   Return to corridor and enter the room at the end. Play dice game on floor: no skill, just keep throwing the dice. After winning, the train eventually arrives with a prize. Take the right hand. Note pattern on wall.
   letter F?
   180 0 90 90 (rotation clockwise from top left)
   F F
   F F

   Back out to corridor, door on right sealed.

   Go back downstairs to the kitchen. Turn on a hob and use the kid paper on the flame. Take back the paper and look at it again.

   Left arm still missing.

   If anyone can share how to solve the dining room lamp, please share and I’ll look in tomorrow – I really need to go to bed now.

3. bq says:

   October 15, 2010 at 7:03 pm

   dining room lamp:
   Show

   just be sure that you line up the 4 different symbols in exactly the same horizontal location relative to the other and match each row same. so first row will be plus, number, beta, diamond. second row: plus, number, beta, diamond. third row: plus, number, beta diamond. then when you line them up vertically they match

   • Genie says:

     October 16, 2010 at 4:44 am

     Thanks bq – I was concentrating Show

     in columns, it’s so much easier lining up row by row.

     Now stuck with Show

     the robot and the light shifting.

     • Genie says:

       October 16, 2010 at 5:26 am

       nvm – eventually lit them all.

4. hilman says:

   October 15, 2010 at 9:43 pm

   great games..!!!
   love it…. but the graphics should be improved, but i believe it won’t bother you, because this kind of game always excites you..
   hope the sequel will come soon..

5. Genie says:

   October 16, 2010 at 6:03 am

   Phew what a marathon! Great game and finally out. Here’s a full walkthrough (but not all the puzzles are fully explained):
   Show

   Open garage door (press button to side), take screwdriver. Note code pad on door.

   Leave garage, approach front door and use screwdriver to remove panel. Arrange tubes and press panels to move ball first from left to middle and then from middle to right. Door should open.

   Enter hall. Examine wiring to right of bars (fuses required). Note key on ceiling fan. Press “F” button on wall ahead – key falls. Take key.

   Use key on door on right. Enter room. Puzzle on cupboard on left: Starting with the inner circle, number 1, rotate the ring to line up the parts. Press the numbers 1-4 as each ring is lined up with the previous. Finally rotate the whole thing to the ball release position and door opens. Take fuse.

   Turn on table lamp and note code: 2958. Back up twice (front yard) and enter the garage again. Use the code in the safe at the back and take a second fuse. Back out.

   Go back in the house and to the clock arrangement to the right of the bars. Insert the two fuses from the inventory. Rotate the rings (first three controls) to form a flow of liquid/gas from the centre, out to both left and right. The balloon should inflate and both barriers (top/centre) should drop. Press the final control (yellow) to fire the arrow and raise the bars.

   Enter the dining room. Note parts missing from painting on wall. Note ceiling light. Open the freezer compartment on the right (top door). Note switch at the back behind the ice. Press DFrost. Wait a moment and press the switch.

   Now you can zoom on the ceiling light. Move the cells to light up all four lanterns. Need to align the symbols so that each column has the same symbol in each row. See hint from bq above. Take the left hand.

   Open the door back left and enter the toilet. Remove the cystern lid, flush the toilet and take the glasses (fingerprint viewers) that fall. Back out.

   Back up and onto the staircase to the left. Go upstairs (first floor).

   Library (first floor on left): Solve the storyboard on the wall back left. Press Check when in order and take the prize (a right leg).

   Enter the bedroom to the right. Move the right hand pillow and take kid paper. Examine it.

   Enter the bathroom. Use glasses and take print on right.

   Return to corridor and enter the room at the end. Play dice game on floor: no skill, just keep throwing the dice. If you lose, just play again. After winning, the train eventually arrives with a prize. Take the right hand. Note the pattern on wall (letter F’s rotated).

   Back out to corridor, door on right sealed.

   Go back downstairs to the dining room. Enter the kitchen (door on the right). Turn on a hob and use the kid paper on the flame. Take back the paper and look at it again. Open cupboard straight ahead and take the green access card.

   Back out into the dining room and zoom on the diagram on the wall. Place the four limbs from the inventory and rotate them as in the diagram on the kid paper. Press Open.

   Enter the secret passageway and follow the corridor.

   Zoom on the power control on the left. Place the fingerprint.

   Enter the lift. Press the Down button on the lift control. When the doors open, go straight ahead twice.

   Insert the green access card and go straight ahead.

   Circuitry: press the button to the right of the door and enter. Press the button to the right of the door and go straight on to the robot scene. Examine robot – missing nuclear cell. Use screwdriver on robot’s arm to remove both panels. Take fuse. Ignore Nuclear Reactor room for now and back out to lab junction.

   Electricals cell door jams. Examine panel to left of door. Press right inner arrow to show screwhead. Press outer right arrow until screwhead is completely exposed. Use screwdriver to remove screw. Place fuse in slot.

   Back out, open door to electricals and enter. Open next door and enter.

   Ladder on left is blocked. Zoom in on red box and rotate F’s as in diagram shown on the first floor (train room).

   Starting top left and going clockwise:
   rotate twice
   leave
   rotate once
   rotate once
   Press Enter.

   Press the button to the right of the ladder to extend it. Enter the tunnel. Go right. Take the empty nuclear cell. Back out twice.

   Ignore Power Source room for now.

   Back out twice for junction and enter circuitry corridor. Go straight on to robot.

   Open the door to the nuclear reactor and enter. Open the next door and go straight on.

   Open the door to the nuclear reactor. Place the nuclear cell in the reactor. Zoom on the Nuclear Cell Charger Control to the left.

   Need to adjust Temperature, Voltage and Fuel to make the total value 132. The temperature increases in steps of 11, the voltage in steps of 13 and fuel in steps of 17.

   11C + 13V + 17 L = 132
   C,V,L are integers from 0 to 10 (7.17 + 13, V=7, L=1, C=0).

   Press Start. When the Nuclear Reactor opens, take back the cell.

   Back up twice, zoom on the robot and insert the charged cell. Need to get all the lights lit up. The first button toggles lights on/off but only affects the first six lights. The second button shifts all the lights one place to the left. I eventually solved it by concentrating on getting only four lit bulbs together then moving the unlit ones to the first six places.

   Take the blue access card and back up twice to the lab junction. Enter the electricals corridor and go straight on.

   Open the door to the Power Source and enter. Open the next door and enter. Train battery – light pattern required. 7 on/off lights.

   Go back to the lift and go down (Weapons lab). Leave lift. Go straight ahead twice and use blue access card in slot. Enter Weapon Lab junction.

   Go through to weapon depot on left. Approach weapons:
   Reaper xjc, Saw gsd, Bazoooka rkt, Foexx(missing).

   Back up, zoom on wire junction box on floor. Connect wires according to geometric shapes. Back up and zoom on weapon producer. Weapon password required (3 digits).

   Back up and go on to Firing range. Open cupboard on right and note passcodes:
   xjc 629 926
   gsd 943 349
   foexx 835 —

   Go straight on and see that you need the foexx weapon. Leave through exit and back up.

   Return to weapons depot. Zoom on Weapons producer, enter code 835 from list and take Foexx. Back out and enter Ammo Depot on right of junction. Zoom on Ammo producer and enter code 538 (reverse of weapon code) and take ammo – weapon now loaded.

   Return to firing range, zoom on weapon placement platform and place weapon. Click on Fire. Back up and go straight on to debris. Take Orange Access card. Back up, leave through exit and back up all the way to the lift.

   Go down to Station level. Leave lift. Go straight ahead and insert orange card. Go all the way ahead to train. Click on battery compartment to right and note lights pattern.
   1
   0
   0
   1
   1
   0
   1

   Return to lift and go up twice to EE lab level. Back in electricals, enter the Power Source room. Enter the code in the train battery cupboard and press Enter. Take the train battery.

   Return to lift, down twice to station. Go to train, insert battery, enter train, press Go. Go right twice and straight on to Army command centre.

   Enter chemical lab and zoom on Nuero-Toxin producer.
   7A,11B,13C=163 (10 chemical C + 3 chemical B). Press Produce and take Nuero toxin.

   Back up and enter Computer Lab. Zoom on big screen. Move the coloured virus boxes to their positions as instructed, click Create Virus and take virus stick.

   Back out to Commander control, zoom on control and click Self Destruct.

   Insert nuero toxin and virus stick.

   To be continued…

6. osmodiar says:

   October 17, 2010 at 2:45 pm

   I’m a little annoyed by the interface: too much explanation. I don’t need a window to pop up and say “New Task: find screwdriver.”

7. bones says:

   October 19, 2010 at 1:25 pm

   this link explains the dining room puzzle x

8. casey says:

   January 25, 2011 at 2:18 pm

   i can’t figure out how to get past the picture frame in the dinning room. Can someone enlighten me??

Posted on Friday, October 15th, 2010. Follow any responses through the RSS 2.0 feed.